Digital TV Antenna 200 Miles 4K 25DBI High Gain Portable Indoor HDTV Antenna Supports new and old TV
Features:
1.light as a feather,you can place it anywhere and no power needed
2.match your home decoration,can be easily behind a picture,bookshelf or television
3.you can put it on the wall,on the table or window(highly recommended) and it will make you enjoy crystal clear digital & HD shows with many features.
Specifications:
Operating frequency: VHF (172-240 MHz)/UHF(470-860 MHz)
Standing wave ratio: ≤ 1.5
Rated power: 50W
Output impedance: 75 Ω
LNA high gain: 25dBi
Cable length: 3meters/9.84ft
Signal support: HDTV, DTMB, ATSC, DVB-T, DMB-T, ISDB-T, etc.
How to use
Step 1: Connect the end (f-male) of attached coaxial cable to the ANT / IN connector on the back of the TV or DVB-T tuner.
Step 2: In the TV's setup menu, set the tuner mode to "Antenna" or "Air".
Step 3: In the TV's setup menu, set TV to "scan" for channels. This can sometimes be referred to as auto program, auto scan, channel search or channel scan.
Step 4: If reception is sporadic, try moving the antenna to another location and rescanning the TV until optimal position is found.
Step 5: fix the antenna at the optimal position you found.
Remark:
1. placing the antenna higher or close to/in a window may result in better reception. you should rescan when you move the antenna.
2.If you have a flat HDTV,please go through your TV manual to make sure your TV comes with built-in tuner.
3.make sure you have a HD recerive; otherwise no HD channels can be retrieved. Please read receiver manual.
4. You should retune your TVs and digital receiver of time to make sure you reseiving all available services. retuning only takes a few minites and can be done with your remote control.
5. TV reception capacity depends on the distance between your home, sending tower and surrounding environments.
Package Includes:
1 x TV Antenna(Without amplifier)
Features:
1.light as a feather,you can place it anywhere and no power needed
2.match your home decoration,can be easily behind a picture,bookshelf or television
3.you can put it on the wall,on the table or window(highly recommended) and it will make you enjoy crystal clear digital & HD shows with many features.
Specifications:
Operating frequency: VHF (172-240 MHz)/UHF(470-860 MHz)
Standing wave ratio: ≤ 1.5
Rated power: 50W
Output impedance: 75 Ω
LNA high gain: 25dBi
Cable length: 3meters/9.84ft
Signal support: HDTV, DTMB, ATSC, DVB-T, DMB-T, ISDB-T, etc.
How to use
Step 1: Connect the end (f-male) of attached coaxial cable to the ANT / IN connector on the back of the TV or DVB-T tuner.
Step 2: In the TV's setup menu, set the tuner mode to "Antenna" or "Air".
Step 3: In the TV's setup menu, set TV to "scan" for channels. This can sometimes be referred to as auto program, auto scan, channel search or channel scan.
Step 4: If reception is sporadic, try moving the antenna to another location and rescanning the TV until optimal position is found.
Step 5: fix the antenna at the optimal position you found.
Remark:
1. placing the antenna higher or close to/in a window may result in better reception. you should rescan when you move the antenna.
2.If you have a flat HDTV,please go through your TV manual to make sure your TV comes with built-in tuner.
3.make sure you have a HD recerive; otherwise no HD channels can be retrieved. Please read receiver manual.
4. You should retune your TVs and digital receiver of time to make sure you reseiving all available services. retuning only takes a few minites and can be done with your remote control.
5. TV reception capacity depends on the distance between your home, sending tower and surrounding environments.
Package Includes:
1 x TV Antenna(Without amplifier)